New products

Fischer Elektronik WLFT 404 50x50, thermally conductive electrically insulating foil both sides adhesive, 50x50mm.
The connection of the device to be dissipated to the heat sink is especially important as for a poor heat transfer, i.e. from the device to the heatsink, the heat conduction respectively the heat transition is reduced and the device temperature will be significantly increased. An optimal heat transfer can only be achieved if the inevitable tolerances, unevennesses and roughnesses of the surfaces to be connected which occur by production processes will be equalised. Suitable thermal conductive foils matching to the application provide excellent solutions for the thermotechnical contact optimization.

DMC BT-BS-618W, wrench with high-strength hard rubber strap recommended for connector assemblies with 2-inch diameter or larger.
Diameter Range (inches):  1.00 to 4.00
Maximum Torque Limit (lbs):  400
DMC strap wrenches are used to tighten or torque connector components while working in assembly. Strap wrenches apply a uniform grip around connectors that protects them from high pressure damage.

DMC BT-BS-611B, wrench with high-strength polyester strap recommended for general connector assembly use. Overall great performance.
Diameter Range (inches):  1.00 to 4.00
Maximum Torque Limit (lbs):  250
DMC strap wrenches are used to tighten or torque connector components while working in assembly. Strap wrenches apply a uniform grip around connectors that protects them from high pressure damage.

DMC BT-BS-610B, wrench with high-strength polyester strap recommended for general connector assembly use. Overall great performance.
Diameter Range (inches):  0.25 to 1.50
Maximum Torque Limit (lbs):  100
DMC strap wrenches are used to tighten or torque connector components while working in assembly. Strap wrenches apply a uniform grip around connectors that protects them from high pressure damage.

DMC BT-BS-609B, wrench with high-strength polyester strap recommended for general connector assembly use. Overall great performance.
Diameter Range (inches):  0.50 to 2.50
Maximum Torque Limit (lbs):  200
DMC strap wrenches are used to tighten or torque connector components while working in assembly. Strap wrenches apply a uniform grip around connectors that protects them from high pressure damage.

DMC BT-SJ-468-1, replacement jaw insert for DMC BT-SJ-468. Note: 2pcs. required per tool!

DMC BT-SJ-468 is a padded jaw plier used for tightening accessory attachments (backshells) to circular connectors.

DMC TH285 is qualified to MIL-DTL-22520/1 and AS22520/1.
DMC M22520/1-13 (TH285) turret head is used with the M22520/1-01 (AF8) tool frame and adapts the tool frame to crimp coaxial connector center contacts terminated RG-142, RG-213, RG-214, RG-255, RG-393 and RG-400 cables. The data plate on each turret head designates which contacts the turret accommodates and suggested selector depth settings for the wire size being used. 

DMC M22520/2-10 (K43) is a positioner used to locate crimps on size 20 pin and socket contacts installed in MIL-C-38999 circular connectors. This positioner is used with the M22520/2-01, AFM8 DMC tool frame and adapts the tool frame to a particular application. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position.

DMC M22520/2-06 (K41) is a positioner used to locate crimps on size 22 socket contacts installed in MIL-C-24308 and MIL-C-38999 circular connectors. This positioner is used with the M22520/2-01, AFM8 DMC tool frame and adapts the tool frame to a particular application. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position.

DMC TH4 is qualified to MIL-DTL-22520/1 and AS22520/1.
M22520/1-03 (TH4) turret head is used with the M22520/1-01 (AF8) tool frame and adapts the tool frame to a particular application. The data plate on each turret head designates which contacts the turret accommodates and suggested selector depth settings for the wire size being used. 

Amphenol TV06RW-11-02PN, MIL-C-38999 subminiature cylindrical connector, cable mounting (plug), with 2 male gold plated crimp contacts. Backshell not included!